HPC 54″ Rectangular-S Fire Pit Insert – Electronic Ignition – S-Burner Insert Series
How It Works
Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
On/Off Models: Includes the convenience and safety features- optional remote control available. Bluetooth High / Low Flame Control Models: This option includes a smart remote and App via smart device control with 2-way communication with the fire pit. Remote allows flame height control while receiving
information from fire pit to advise user of fire pit status (flashing LED).
Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.
• Fully Assembled- ready to install. Control components are protected within valve box.
• Start via wall switch or remote control; Auto re-light if flame is lost.
• Ignition is complete using a robust and reliable Hot Surface igniter.
• On/Off models: Use with optional wall switch, Remote Control or your whole house system
• High/Low Flame Control Models: Adjust high setting to low setting- ~45% turndown (Remote Control included). Not for use with your whole house system.
• 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
• 24vac Option: Typically used with lower voltage requirements.
• Natural Gas or Liquid Propane: Factory built & tested for either fuel.
• Internal temperature monitoring with overheat auto shutoff.
• CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new EI system already meets upcoming 2020 ANSI requirements).
• Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.
EI Series Specifications
|Size (A”)||Power||Gas type||Model – Flame ON/OFF||Model – Bluetooth (HI/LO)||BURNER||Max BTU|
|54”||120vac||Natural Gas||54X16SSEI-S-NG/120VAC||54X16SSEI-S-HI/LO-NG/120VAC||48″ x 10″ S-Fire||110K|
|* 24vac||Natural Gas||54X16SSEI-S-NG/24VAC||54X16SSEI-S-HI/LO-NG/24VAC|